AWS Network Firewall
Version: 1.0
Updated: Jan 24, 2024
AWS Network Firewall is a stateful, managed, network firewall and intrusion detection and prevention service for Amazon Virtual Private Cloud (Amazon VPC). With Network Firewall, you can filter traffic at the perimeter of your VPC. This includes filtering traffic going to and coming from an internet gateway, NAT gateway, over VPN, or Direct Connect.
Actions
- Add Rule Group To Firewall Policy (Containment) - Add specified rule group to firewall policy.
- Create Rule Group (Containment) - Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
- Describe Firewall Policy (Enrichment) - Returns the data objects for the specified firewall policy.
- Describe Rule Group (Enrichment) - Returns the data objects for the specified rule group.
- List Firewall Policies (Enrichment) - Retrieves the metadata for the firewall policies that you have defined.
- List Rule Groups (Enrichment) - Retrieves the metadata for the rule groups that you have defined.
External Libraries
Configure AWS Network Firewall in Automation Service and Cloud SOAR
Before you can use this automation integration, you must configure its authentication settings so that the product you're integrating with can communicate with Sumo Logic. For general guidance, see Configure Authentication for Automation Integrations.
How to open the integration's configuration dialog
- Access App Central and install the integration. (You can configure at installation, or after installation with the following steps.)
- Go to the Integrations page.
Classic UI. In the main Sumo Logic menu, select Automation and then select Integrations in the left nav bar.
New UI. In the main Sumo Logic menu, select Automation > Integrations. You can also click the Go To... menu at the top of the screen and select Integrations. - Select the installed integration.
- Hover over the resource name and click the Edit button that appears.
In the configuration dialog, enter information from the product you're integrating with. When done, click TEST to test the configuration, and click SAVE to save the configuration.
For configuration information specific to AWS integrations, see the AWS integrations section.
For information about AWS Network Firewall, see AWS Network Firewall documentation.
Change Log
- January 24, 2024 - First upload